Cygnus M3-DIVE - Changing Gauge Settings; Material Velocity List

Cygnus DIVE Operating Manual
M3-DIVE-M-ENG_Iss9.docx
Page 86 of 117
Changing Gauge Settings
To change the gauge settings click Gauge -> Measurement
Settings. You can change the Units, Measurement mode, Velocity,
Deep Coat and A-Scan Range. Any changes will be sent to the
gauge and also update CygLink.
Measurement Settings Screens
Material Velocity List
You can select the Material Velocity from a list of common
materials, in the Gauge -> Measurement Settings screen click
the [ ] button to display the list.
Velocity List