Cygnus M3-DIVE - Technical Specifications

Cygnus DIVE Operating Manual
M3-DIVE-M-ENG_Iss9.docx
Page 104 of 117
22. Technical Specifications
Cygnus DIVE Technical Specifications
General Attributes
Size
105 mm x 110 mm x 35 mm (W x H x D)
(4.1 in x 4.3 in x 1.4 in)
Weight In Air
Complete Gauge 905 g (2 lb.)
Gauge Body 557 g (1.22 lb.)
Battery 79 g (0.17 lb.)
Probe & Cable 269 g (0.6 lb.)
Power Supply
Rechargeable Lithium-Ion Battery
Probe Sockets
Fischer 105 Series
Operating Temperature Range
-10°C to +50°C (14°F to 122°F)
Storage Temperature Range
-10°C to +60°C (14°F to 140°F)
Battery Operation Time
Approximately 10 hrs. continuous measurement with fully
charged battery pack.
Battery Voltage Range
Min 3.2 V dc, Max 4.5 V dc
Battery Type
Sealed Lithium-Ion rechargeable single cell. 8.1 Watt-hours.
Internally protected against short circuit and overcharge.
Low Battery Indication
Battery Level Indication on Display with Low Battery Warning
Message.
PRF
N/A
Monitor Outputs
N/A
Through Coating
Measurements
Through coating measurement in Multiple Echo mode only.
Coatings up to 3 mm thick as standard depending on coating
velocity.
Deep Coat mode provides ability to measure through thicker
coatings depending on coating material.
Materials
Sound Velocity from 2000 m/s to 9000 m/s
[0.0780 in/us to 0.3543 in/us]