Cygnus M3-DIVE - Page 106

Cygnus DIVE Operating Manual
M3-DIVE-M-ENG_Iss9.docx
Page 106 of 117
Cygnus DIVE Technical Specifications
Data Output and Storage
RS485 2-wire duplex serial data output, 56000/115200 Baud.
32 Mbit Internal Flash Data Storage.
Data Connector
Fischer 105 Series
Calibration setting storage
Calibration Data stored to Internal Flash Memory
Calibration Mechanisms
Not required for Multiple Echo mode.
Automatic V-path correction for twin crystal probes.
Option of two point calibration for twin crystal probes.
Display & Recall Facilities
N/A
Display Response Time
125 ms / 500 ms
Printer Output
N/A
Environmental Rating
IP68 Rated to 300 m (984 ft) immersion in sea water
MIL STD 810G Method 501.6 (High Temp +55°C)
MIL STD 810G Method 502.6 (Low temp -20°C)
MIL STD 810G Method 507.6 (Humidity 95%)
Shock & Impact
MIL STD 810G Method 514.7 (Vibration)
MIL STD 810G Method 516.7 (Shock 20g)
MIL STD 810G Method 516.7 (Transit Drop 1.22m)
Compliance
RoHS
CE
UKCA
An EU and UK Decleration of Conformity is supplied with the
product kit.
Designed for
BS EN 15317
The Cygnus DIVE gauge is a European Registered Community
Design, No. 001947326-0001. See http://oami.europa.eu for more
details.