D-Link DAP-1665

35D-Link DAP-1665 User Manual
Section 3 - Conguration
Visibility
Status:
Security
Mode:
Select whether you would like the network name (SSID) of your
wireless network to be Visible or Invisible. If Invisible, the
SSID of the DAP-1665 will not be shown by Site Survey utilities.
Therefore, the SSID will have to be manually entered so wireless
clients can connect.
For information on how to set up wireless security, please refer
to “Conguring Wireless Security” on page 46.
5GHz Band
Check the box to Enable the wireless function for the 5GHz
band. You may uncheck the box to disable all wireless functions.
If wireless is enabled, you may also set up a specic schedule.
Select a schedule from the drop-down menu or click Add New
to create a new schedule. The schedule is set to Always by
default.
Specify a Network Name (SSID) to identify the 5GHz network.
This is the network name that wireless clients will search for
when connecting to your wireless network. This name should
be dierent to that of the 2.4GHz network congured above.
Enable Wireless:
Wireless
Network Name: