D-Link DAP-1665

40D-Link DAP-1665 User Manual
Section 3 - Conguration
Enable Wireless:
Wireless
Network Name:
802.11 Mode:
Wireless
Channel:
Enable Auto
Channel Scan:
Channel Width:
Visibility Status:
Check the box to Enable the wireless function for the 2.4GHz
band. When the box is unchecked, all wireless functions are
disabled. With wireless enabled, you may set up a specic
schedule. Select a schedule from the drop-down menu or click
Add New to create a new schedule.
Specify a Network Name (SSID) to identify the 2.4GHz network.
This is the SSID that wireless clients will search for when
connecting to your wireless network.
When the Bridge Band selected above is 2.4GHz, the contents of
this eld will reect the 802.11 Mode selected above. Selecting
an 802.11 Mode is only possible when Bridge Band is 5GHz:
802.11n Only - Select if you are only using 802.11n wireless
clients.
Mixed 802.11n and 802.11g - Select if you are using a mix of
802.11n and 802.11g wireless clients.
Mixed 802.11n, 802.11g and 802.11b - Select if you are using
a mix of 802.11n, 802.11g, and 802.11b wireless clien
Indicates the channel setting. Do not check the box to Enable
Auto Channel Scan if you would like to change the channel
to match the channel setting of an existing wireless network.
Check the box to Enable Auto Channel Scan, if you would like
the DAP-1665 to automatically choose the channel with the
least amount of interference.
When the Bridge Band selected above is 2.4GHz, the contents of
this eld will reect the Channel Width selected above. Selecting
a dierent Channel Width here is only possible when Bridge Band
is set to 5 GHz.
Select whether you would like the network name (SSID) of your
2.4GHz wireless network to be Visible or Invisible. If Invisible
is selected, the SSID of the DAP-1665 will not be shown by Site
Survey utilities. Therefore, the SSID will have to be manually
entered so wireless clients can connect.
2.4 GHz Band
Note: If the Bridge Band is set to 2.4GHz, the settings for the AP’s 2.4GHz band will be the same as those for the bridge, so only the Network Name (SSID)
and Visibility of the 2.4GHz band can be changed. However, you can congure all settings for the 5GHz AP, if you check the box to Enable Wireless.