D-Link DAP-1665

52D-Link DAP-1665 User Manual
Section 3 - Conguration
My IPv6
Connection is:
IPv6 DNS
Settings:
Primary DNS
Server:
Secondary DNS
Server:
Select Autoconguration (SLAAC/DHCPv6) from the drop-
down menu. The access point will request IPv6 settings from a
DHCPv6 server on your network.
You may select to have the access point automatically obtain
DNS server settings from the DHCP server, or you can specify
IPv6 DNS server settings to be used. If you select Obtain IPv6
DNS Server automatically, no further conguration is required.
If you selected the option to Use the following IPv6 DNS
Servers, enter the Primary IPv6 DNS server address to be used.
Enter the Secondary IPv6 DNS server address to be used.
Click Save Settings at the top of the page to save the current
conguration.