D-Link DAP-2695 User Guide

45D-Link DAP-2695 User Manual
Web User Interface
Static IP (Manual) is chosen here. Choose this
option if you do not have a DHCP server in
your network, or if you wish to assign a static
IP address to the DAP-2695. When Dynamic
IP (DHCP) is selected, the other elds here
will be grayed out. Please allow about 2
minutes for the DHCP client to be functional
once this selection is made.
Assign a static IP address that is within the
IP address range of your network.
Enter the subnet mask. All devices in the
network must share the same subnet mask.
Enter the IP address of the gateway/router
in your network.
Enter a DNS server IP address. This is usually
the local IP address of your gateway/router.
Enter the username for the new account
here.
Enter the password for the new account here.
Get IP From :
IP Address :
Subnet Mask :
Gateway :
DNS :
Username:
Password:

D-Link DAP-2695 Specifications

Operating Environment

operating temperature	0˚C to 40˚C
storage temperature	-20˚C to 65˚C
operating humidity	10%~90% (non-condensing)
storage humidity	5%~95% (non-condensing)

Power

operating voltage	48V DC +/- 10% for PoE
voltage and current for PoE	48V/0.5A

Wireless Specifications

wireless frequency range	2.4 to 2.4835 GHz and 5.15 to 5.85 GHz
antenna type at 2.4GHz	3x Detachable 4 dBi Omni antennas
antenna type at 5GHz	3x Detachable 6 dBi Omni antennas

Weight and Dimensions

length	198.8 mm
width	190 mm
height	36.5 mm