D-Link DCS-5029L

35D-Link DCS-5029L User Manual 35
Section 4 - Conguration
Motion Detection Setup Wizard
This wizard will guide you through a step-by-step process to congure your camera's motion
detection functions.
Click Next to continue.
Step 1
This step will allow you to enable or disable motion detection, specify the detection sensitivity,
and adjust the camera’s ability to detect movement.
You can specify whether the camera should capture a snapshot or a video clip when motion is
detected.
Refer to “Motion Detection” on page 46 for more information about how to congure motion
detection.
Step 2
Select Always to always detect motion. Otherwise, for motion detection based on a customized
schedule, click From and specify the day(s) and hours.