D-Link DCS-5029L - Adding Media for Events; Media Type Setup

52D-Link DCS-5029L User Manual 52
Section 4 - Conguration
Add Media
There are three types of media, Snapshot, Video Clip, and System Log. After making any changes, click the Save Settings button to save your changes.
Media Name:
Snapshot:
Source:
Send pre-event
image(s) [0~3]:
Send post-event
image(s) [0~7]:
File name prex:
Add date and time
sux to le name:
Video Clip:
Source:
Pre-event
recording:
Enter a unique name for media type you want to
create.
Select this option to set the media type to snapshots.
Set the video prole to use as the media source.
Refer to “Audio and Video” on page 43 for more
information on video proles.
Set the number of pre-event images for the camera
to take. Pre-event images are images taken before the
main event snapshot is taken. You can set up to three
pre-event images.
Set the number of post-event images for the camera
to take. Post-event images are images taken after the
main event snapshot is taken. You can set up to seven
post-event images to be taken.
Enter the prex name to be added to the le name.
Check this box to add date and time information as
le name sux.
Select this option to set the media type to video
clips. Set the video prole to use as the media source.
Refer to “Audio and Video” on page 43 for more
information on video proles.
Set the number of seconds to record before the main
event video clip starts. You can record up to three
seconds of pre-event video.