54D-Link DCS-5029L User Manual 54
Section 4 - Conguration
Add Event
Create and schedule up to two events with their own settings. After making any changes, click the Save Settings button to save your changes.
Event name:
Enable this
event:
Priority:
Delay:
Trigger:
Video Motion
Detection:
Periodic:
Digital input:
System Boot:
Network Lost:
Passive Infrared
Sensor:
Sound Detection:
Enter a name for the event.
Check this box to activate this event.
Set the priority for this event. The event with higher
priority will be executed rst.
Enter the delay time (in seconds) before checking
for the next event. It is used for events of motion
detection type, as well as for triggers like digital input
and passive infrared sensor.
Specify the input type that triggers the event.
Triggers an event when motion is detected.
The event is triggered in specied intervals. The trigger
interval unit is in minutes.
The external digital input triggers an event.
Triggers an event when the system boots up.
Triggers an event when the network connection is lost.
Triggers an event when the PIR sensor is activated by
moving infrared objects, even in a dark environment.
Triggers an event when sound is detected.
To Next Page
Loading...
Need help?
General
