D-Link DCS-5029L

40D-Link DCS-5029L User Manual 40
Section 4 - Conguration
Check to enable the DDNS function.
Select your Dynamic DNS Server from the drop-down menu.
Enter the Host Name of the DDNS server.
Enter your User Name or e-mail used to connect to the DDNS server.
Enter your Password used to connect to the DDNS server.
This allows you to specify the periodic update time for notifying the
DDNS server of the camera’s current IP address.
Displays the connection status as Active or Inactive.
Click Save Settings.
Enable DDNS:
Server Address:
Host Name:
User Name:
Password:
Timeout:
Status:
Dynamic DNS (DDNS)
This section allows you to congure the DDNS (Dynamic Domain Name Server) settings for your camera. DDNS will allow users to access your
camera using a domain name instead of an IP address.