D-Link DCS-5029L - HTTPS Secure Connection; Enabling HTTPS and Certificate Management

61D-Link DCS-5029L User Manual 61
Section 4 - Conguration
HTTPS
This page allows you to install and activate an HTTPS certicate for secure access to your camera.
Enable HTTPS
Secure Connection:
Create Certicate
Method:
Create certicate:
Certicate
Information:
Check the box to enable the HTTPS (Hypertext Transfer Protocol Secure)
service.
Choose the way the certicate should be created. Three options are
available:
1. Create a self-signed certicate automatically
2. Create a self-signed certicate manually
3. Create a certicate request and install
Click Create to create the certicate.
Displays the Status and other details about the certicate.
Note: The certicate cannot be removed while the HTTPS is still enabled.
To remove the certicate, you must rst uncheck Enable HTTPS secure
connection and then click Remove.
Click Save Settings.