12D-Link DCS-5300 User Manual
The Installation Wizard will now show a MAC address for the DCS-5300 and an IP address. This IP address may not be
correct at this step in the installation until you see “Yes” under the assigned column. The camera is now automatically
congured with an IP address consistent to the device it is connected to.
You have now completed the Setup Wizard and are ready to use your camera!
For more information regarding the functions of this screen, see the following section titled “Installation Wizard
Screen.”
Select the MAC address
Click on the Link to Selected Devices
button.
After you click on the Link to Selected Devices button, Installation
Wizard will automatically open your Internet browser to the IP Address
of the DCS-5300, in this example it is: http://192.168.0.146.
Your DCS-5300 may have a different IP Address.
To Next Page
Loading...
