D-Link DCS-5300 User Manual

14D-Link DCS-5300 User Manual
Click Next and then Apply to save the congured settings. Users can click Previous
to modify changes or mistakes.
After the settings have been saved, click the Done button that appears.
Here users can congure the Network Settings for the camera. Enter the IP
address, Subnet mask, Default router IP, Primary DNS, and Secondary DNS.
Automatically, the option to reset IP address at boot is selected. If you would like
to save your IP address settings, make sure to uncheck this box. These settings
can also be congured on the Advanced > Network screen (page 38) when
conguring the camera via a Web Browser.
Network Settings:

D-Link DCS-5300 Specifications

General

Digital zoom	4 x
Maximum frame rate	30 fps
Camera shutter speed	1/60 - 1/15000 s
Minimum illumination	1 lx
Maximum video resolution	320 x 240 pixels
Pan range	270 °
Sensor type	CCD
Product color	Silver
Tilt angle range	-90 - 90 °
Built-in microphone	Yes
Optical sensor size	1/4 \
Focus	2.0
I/O ports	A/V MIC
Power supply type	12VDC 1.5A
Cabling technology	10BaseT, 100BaseT
Supported network protocols	TCP/IP, HTTP, SMTP, FTP, Telnet, NTP, DNS, DHCP
Compatible operating systems	Microsoft Windows XP, 2000, Me, 98SE
Dimensions (W x D x H) (imperial)	4.1 x 4 x 4.4 \
Minimum system requirements	Internet Explorer 5.x +