D-Link DCS-5300 User Manual

15D-Link DCS-5300 User Manual
The upgrade window allows users to upload a saved rmware le. If the rmware
is older than that currently on the camera, a screen will appear indicating so and
prompting the user to conrm the upload.
This displays information about the rmware and plugin currently installed on the
camera.
Indicate the location of the rmware to be uploaded to the camera.
This displays the le name of the rmware selected for upload.
Click the Reset to Default tab to reset the camera’s settings to factory defaults.
Click About to display the current version and date.
Click the Exit tab to exit the Installation Wizard screen.
Upgrade:
Package
Information:
Locate the
Firmware to
Upgrade:
Selected
Package:
Reset to Default:
About:
Exit:

D-Link DCS-5300 Specifications

General

Digital zoom	4 x
Maximum frame rate	30 fps
Camera shutter speed	1/60 - 1/15000 s
Minimum illumination	1 lx
Maximum video resolution	320 x 240 pixels
Pan range	270 °
Sensor type	CCD
Product color	Silver
Tilt angle range	-90 - 90 °
Built-in microphone	Yes
Optical sensor size	1/4 \
Focus	2.0
I/O ports	A/V MIC
Power supply type	12VDC 1.5A
Cabling technology	10BaseT, 100BaseT
Supported network protocols	TCP/IP, HTTP, SMTP, FTP, Telnet, NTP, DNS, DHCP
Compatible operating systems	Microsoft Windows XP, 2000, Me, 98SE
Dimensions (W x D x H) (imperial)	4.1 x 4 x 4.4 \
Minimum system requirements	Internet Explorer 5.x +