D-Link DES-3326S - Page 104

D-Link DES-3326S Layer 3 Switch CLI Reference
show stp
Purpose Used to display the Switch’s current STP
configuration.
Syntax
show stp
Description This command displays the Switch’s current
STP configuration.
Parameters none
Restrictions None.
Example usage:
To display the status of STP on the Switch:
Status 1: STP enabled with STP compatible version
DES-3326S:4#show stp
Command: show stp
Bridge Parameters Settings
STP Status : Enabled
Max Age : 20
Hello Time : 2
Forward Delay : 15
Priority : 32768
STP Version : STP compatible
TX Hold Count : 3
Forwarding BPDU : Enabled
Bridge Current Status
Designated Root Bridge : 00-00-51-43-70-00
Root Priority : 32768
Cost to Root : 200000
Root Port : 10
Last Topology Change : 53sec
Topology Changes Count : 1
Protocol Specification : 3
Max Age : 20
Hello Time : 2
Forward Delay : 15
Hold Time : 3
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
DES-3326S:4#
98