D-Link DES-3326S - Page 118

D-Link DES-3326S Layer 3 Switch CLI Reference
show traffic control
Purpose Used to display current traffic control settings.
Syntax
show traffic control <storm_grouplist>
Description This command displays the current storm traffic
control configuration on the Switch.
Parameters
group_list <storm_grouplist> − Used to specify a
broadcast storm control group with the syntax:
module_id:group_id.
Restrictions None.
Example usage:
To display traffic control setting:
DES-3326S:4#show traffic control
Command: show traffic control
Traffic Control
Broadcast Multicast Destination
Module Group [ports] Threshold Storm Storm Lookup Fail
------ ------------- --------- --------- --------- -----------
1 1 [ 1 - 8 ] 128 Disabled Disabled Disabled
1 2 [ 9 - 16] 128 Disabled Disabled Disabled
1 3 [17 - 24] 128 Disabled Disabled Disabled
1 4 [ 25 ] 128 Disabled Disabled Disabled
1 5 [ 26 ] 128 Disabled Disabled Disabled
Total Entries: 5
DES-3326S:4#
112