D-Link DES-3326S - Page 125

D-Link DES-3326S Layer 3 Switch CLI Reference
show scheduling
Purpose Used to display the currently configured traffic
scheduling on the Switch.
Syntax
show scheduling
Description
The show scheduling command displays the
current configuration for the maximum number
of packets (max_packets) and the maximum
latency (max_latency) values assigned to the
four priority queues on the Switch. The Switch’s
default max_latency = 0. At this value, it will
empty the four hardware queues in order, from
the highest priority (queue 3) to the lowest
priority (queue 0).
Parameters None.
Restrictions None.
Example usage:
To display the current scheduling configuration:
DES-3326S:4# show scheduling
Command: show scheduling
QOS Output Scheduling
MAX. Packets MAX. Latency
------------------- ------------------
Class-0 50 1
Class-1 100 1
Class-2 150 1
Class-3 200 1
DES-3326S:4#
119