D-Link DES-3326S - Page 142

D-Link DES-3326S Layer 3 Switch CLI Reference
enable gvrp
Purpose Used to enable GVRP on the Switch.
Syntax
enable gvrp
Description
This command, along with disable gvrp below,
is used to enable and disable GVRP on the
Switch, without changing the GVRP
configuration on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this
command.
Example usage:
To enable the generic VLAN Registration Protocol (GVRP):
DES-3326S:4#enable gvrp
Command: enable gvrp
Success.
DES-3326S:4#
136