D-Link DES-3326S - Page 143

D-Link DES-3326S Layer 3 Switch CLI Reference
disable gvrp
Purpose Used to disable GVRP on the Switch.
Syntax
disable gvrp
Description
This command, along with disable gvrp below,
is used to enable and disable GVRP on the
Switch, without changing the GVRP
configuration on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this
command.
Example usage:
To disable the Generic VLAN Registration Protocol (GVRP):
DES-3326S:4#disable gvrp
Command: disable gvrp
Success.
DES-3326S:4#
137