D-Link DES-3326S - Page 144

D-Link DES-3326S Layer 3 Switch CLI Reference
show vlan
Purpose Used to display the current VLAN configuration
on the Switch
Syntax
show vlan {<vlan_name 32>}
Description This command displays summary information
about each VLAN including the VLAN ID, VLAN
name, the Tagging|Untagging status, and the
Member|Non-member|Forbidden status of each
port that is a member of the VLAN.
Parameters
<vlan_name 32> − The VLAN name of the
VLAN for which you want to display a summary
of settings.
Restrictions None.
Example usage:
To display the Switch’s current VLAN settings:
DES-3326S:4#show vlan
Command: show vlan
VID : 1 VLAN Name : default
VLAN TYPE : static Advertisement : Enabled
Member ports : 1:1-1:26,2:1-2:26
Static ports : 1:1-1:26,2:1-2:26
Untagged ports : 1:1-1:25,2:1-2:25
Forbidden ports :
VID : 2 VLAN Name : v1
VLAN TYPE : static Advertisement : Disabled
Member ports : 1:26,2:26
Static ports : 1:26,2:26
Untagged ports :
Forbidden ports :
Total Entries : 2
DES-3326S:4#
138