D-Link DES-3326S - Page 163

D-Link DES-3326S Layer 3 Switch CLI Reference
Example usage:
To show igmp snooping:
DES-3326S:4#show igmp_snooping
Command: show igmp_snooping
Multicast router Only : Disabled
VLAN Name : default
Leave Timer : 2
Querier State : Disabled
Querier Router Behavior : Non-Querier
IGMP Snooping Global State : Disabled
Query Interval : 125
Max Response Time : 10
Robustness Value : 2
Last Member Query Interval : 1
Host Timeout : 260
Route Timeout : 260
State : Disabled
VLAN Name : vlan2
Query Interval : 125
Max Response Time : 10
Robustness Value : 2
Last Member Query Interval : 1
Host Timeout : 260
Route Timeout : 260
Leave Timer : 2
Querier State : Disabled
Querier Router Behavior : Non-Querier
State : Disabled
Total Entries: 2
DES-3326S:4#
show igmp_snooping group
Purpose Used to display the current IGMP snooping
group configuration on the Switch.
Syntax
show igmp_snooping group {vlan
<vlan_name 32>}
This command will display the current IGMP
snooping group configuration on the Switch.
Parameters
<vlan_name 32> − The name of the VLAN for
which you want to view IGMP snooping group
configuration information.
Restrictions
Description
None.
157