D-Link DES-3326S - Setting Up Web Management

D-Link DES-3326S Layer 3 Switch CLI Reference
enable 802.1x
Purpose Used to enable the 802.1x server on the Switch.
enable 802.1x
Description The enable 802.1x command enables the
802.1x Port-based Network Access control
server application on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this
command.
Syntax
Example usage:
To enable 802.1x Switch wide:
DES-3326S:4#enable 802.1x
Command: enable 802.1x
Success.
DES-3326S:4#
disable 802.1x
Purpose Used to disable the 802.1x server on the
Switch.
Syntax
disable 802.1x
Description
The disable 802.1x command is used to
disable the 802.1x Port-based Network Access
control server application on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this
command.
Example usage:
To disable 802.1x on the Switch:
DES-3326S:4#disable 802.1x
Command: disable 802.1x
Success.
DES-3326S:4#
162