EasyManua.ls Logo

D-Link DES-3326S - Page 170

D-Link DES-3326S
320 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
D-Link DES-3326S Layer 3 Switch CLI Reference
show 802.1x
Parameters PAE State: Initialize|Disconnected|Connecting|
Authenticating|Authenticated|Held |ForceAuth|ForceUnauth Shows the
current state of the Authenticator PAE.
Backend State: Request|Response|Fail| Idle|Initalize Shows the current state
of the Backend Authenticatior.
AdminCtlDir: Both|In Shows whether a controlled Port that is unauthorized
will exert control over communication in both receiving and transmitting
directions, or just the receiving direction.
OpenCtlDir: Both|In Shows whether a controlled Port that is unauthorized will
exert control over communication in both receiving and transmitting directions,
or just the receiving direction.
Port Control: ForceAuth|ForceUnauth|Auto Shows the administrative control
over the port’s authorization status. ForceAuth forces the Authenticator of the
port to become Authorized. ForceUnauth forces the port to become
Unauthorized.
QuietPeriod Shows the time interval between authentication failure and the
start of a new authentication attempt.
TxPeriod Shows the time to wait for a response from a supplicant (user) to
send EAP Request|Identiy packets.
SuppTimeout Shows the time to wait for a response from a supplicant (user)
for all EAP packets, except for the Request|Identity packets.
ServerTimeout Shows the length of time to wait for a response from a
Radius server.
MaxReq Shows the maximum number of times to retry sending packets to
the supplicant.
ReAuthPeriod shows the time interval between successive re-
authentications.
ReAuthenticate: Enabled|Disabled Shows whether or not to re-authenticate.
Restrictions Only administrator-level users can issue this command.
Example usage:
To display the 802.1x authtication states (stacking disabled):
DES-3326S:4#show 802.1x auth_state ports 1-5
Command: show 802.1x auth_state ports 1-5
Port Auth PAE State Backend State Port Status
------ -------------- ------------- ------------
15:1 ForceAuth Success Authorized
15:2 ForceAuth Success Authorized
15:3 ForceAuth Success Authorized
15:4 ForceAuth Success Authorized
15:5 ForceAuth Success Authorized
DES-3326S:4#
164

Other manuals for D-Link DES-3326S

Related product manuals