D-Link DES-3326S - Page 181

D-Link DES-3326S Layer 3 Switch CLI Reference
show radius
Used to display the current Radius
configurations on the Switch.
Syntax
show radius
Description The show radius command is used to display
the current Radius configurations on the Switch.
Parameters None.
Restrictions None.
Purpose
Example usage:
To display Radius settings on th Switch:
DES-3326S:4#show radius
Command: show radius
Index IP Address Auth-Port Acct-Port Status Key
Number Number
----- ------------------ --------- --------- ----------- ------------
1 10.1.1.1 1812 1813 Active Switch
2 20.1.1.1 1800 1813 Active des3326
3 30.1.1.1 1812 1813 Active dlink
Total Entries : 3
DES-3326S:4#
175