D-Link DES-3326S - Page 213

D-Link DES-3326S Layer 3 Switch CLI Reference
show sntp
Purpose Used to display the SNTP information.
Syntax
show sntp
Description This command will display SNTP settings
information including the source IP address,
time and poll interval.
Parameters None.
Restrictions Only administrator-level users can issue this
command.
Example usage:
To display SNTP configuration information:
GS-3212SR:4#show sntp
Command: show sntp
Current Time Source : System Clock
SNTP : Disabled
SNTP Primary Server : 10.1.1.1
SNTP Secondary Server : 10.1.1.2
SNTP Poll Interval : 30 sec
DES-3326S:4#
207