D-Link DES-3326S - Page 214

D-Link DES-3326S Layer 3 Switch CLI Reference
enable sntp
Purpose Enables SNTP server support.
Syntax
enable sntp
Description This will enable SNTP support. SNTP service
must be separately configured (see config
sntp).Enabling and configuring SNTP support
will override any manually configured system
time settings.
Parameters None.
Restrictions Only administrator-level users can issue this
command. SNTP settings must be configured
for SNTP to function (config sntp).
Example usage:
To enable the SNTP function:
DES-3326S:4#enable sntp
Command: enable sntp
Success.
DES-3326S:4#
disable sntp
Purpose Disables SNTP server support.
Syntax
disable sntp
Description This will disable SNTP support. SNTP service
must be separately configured (see config sntp).
Parameters None.
Restrictions Only administrator-level users can issue this
command.
Example:
To stop SNTP support:
DES-3326S:4#disable sntp
Command: disable sntp
Success.
DES-3326S:4#
208