D-Link DES-3326S - Page 216

D-Link DES-3326S Layer 3 Switch CLI Reference
config time zone
Purpose Used to determine the time zone used in order
to adjust the system clock.
config time-zone {operator [+ | -] | hour
<gmt_hour 0-13> | min <minute 0-59>}
Description This will adjust system clock settings according
to the time zone. Time zone settings will adjust
SNTP information accordingly.
Parameters operator – Choose to add (+) or subtract (-) time
to adjust for time zone relative to GMT.
hour – Select the number hours different from
GMT.
min – Select the number of minutes difference
added or subtracted to adjust the time zone.
Restrictions Only administrator-level users can issue this
command.
Syntax
Example usage:
To configure time zone settings:
DES-3326S:4#config time_zone operator + hour 2 min 30
Command: config time_zone operator + hour 2 min 30
Success.
DES-3326S:4#
210