D-Link DES-3326S - Page 233

D-Link DES-3326S Layer 3 Switch CLI Reference
delete route redistribute
Purpose Used to delete an existing route redistribute
configuration on the Switch.
Syntax
delete route redistribute [dst [rip|ospf] src
[rip|static|local|ospf]]
Description This command will delete the route redistribution
settings on this Switch.
Parameters
dst − Allows the selection of the protocol on the
destination device.
src − Allows the selection of the protocol on the
source device.
Restrictions Only administrator-level users can issue this
command.
Example Usage:
DES-3326S:4#
To delete route redistribution settings:
DES-3326S:4#delete route redistribute dst rip src ospf
Command: delete route redistribute dst rip src ospf
Success.
227