D-Link DES-3326S - Page 240

D-Link DES-3326S Layer 3 Switch CLI Reference
show igmp group
Purpose Used to display the Switch’s IGMP group table.
Syntax
show igmp group {group <group>} {ipif
<ipif_name>}
This command will display the IGMP group
configuration.
group <group> − The multicast group ID.
<ipif_name> − The name of the IP interface the
IGMP group is part of.
Restrictions None.
Description
Parameters
Example Usage:
To display IGMP group table:
DES-3326S:4#show igmp group
Command: show igmp group
Interface Multicast Group Last Reporter Querier IP Address IP Expire Time
-------------------- ------------------- --------------------- ------------------------ -------------------
System 224.0.0.2 10.42.73.111 10.48.74.122 260
System 224.0.0.9 10.20.53.1 10.48.74.122 260
System 224.0.1.24 10.18.1.3 10.48.74.122 259
System 224.0.1.41 10.1.43.252 10.48.74.122 259
System 224.0.1.149 10.20.63.11 10.48.74.122 259
Total Entries: 5
DES-3326S:4#
234