D-Link DES-3326S - Page 244

D-Link DES-3326S Layer 3 Switch CLI Reference
config bootp_relay delete
Purpose Used to delete an IP destination addresses from
the Switch’s BOOTP relay table.
Syntax
config bootp_relay delete ipif <ipif_name>
<ipaddr>
Description This command is used to delete an IP destination
addresses in the Switch’s BOOTP relay table.
Parameters
<ipif_name> − The name of the IP interface that
contains the IP address below.
<ipaddr> − The BOOTP server IP address.
Restrictions Only administrator-level users can issue this
command.
Example Usage:
To delete a BOOTP relay.
DES-3326S:4#config bootp_relay delete ipif System 10.43.21.12
Command: config bootp_relay delete ipif System 10.43.21.12
Success.
DES-3326S:4#
238