D-Link DES-3326S - Page 243

D-Link DES-3326S Layer 3 Switch CLI Reference
config bootp_relay add
Purpose Used to add an IP destination address to the
Switch’s BOOTP relay table.
Syntax
config bootp_relay add ipif <ipif_name>
<ipaddr>
Description This command adds an IP address as a
destination to forward (relay) BOOTP packets to.
Parameters
<ipif_name> − The name of the IP interface in
which BOOTP relay is to be enabled.
<ipaddr> − The BOOTP server IP address.
Only administrator-level users can issue this
command.
Restrictions
DES-3326S:4#
Example Usage:
To add a BOOTP relay.
DES-3326S:4#config bootp_relay add ipif System 10.43.21.12
Command: config bootp_relay add ipif System 10.43.21.12
Success.
237