D-Link DES-3326S - Page 253

D-Link DES-3326S Layer 3 Switch CLI Reference
enable dnsr static
Purpose Used to enable the DNS relay static table.
Syntax
enable dnsr static
This command, in combination with the disable
dnsr static command below, is used to enable
or disable the DNS relay static table function.
Parameters None.
Restrictions Only administrator-level users can issue this
command.
Description
Example Usage:
To enable static table lookup for DNS relay:
DES-3326S:4#enable dnsr static
Command: enable dnsr static
Success.
DES-3326S:4#
disable dnsr static
Purpose Used to disable the DNS relay static table.
Syntax
disable dnsr static
Description
This command, in combination with the disable
dnsr static command below, is used to enable
or disable the DNS relay static table function.
Parameters None.
Restrictions Only administrator-level users can issue this
command.
Example Usage:
DES-3326S:4#disable dnsr static
Success.
To disable static table lookup for DNS relay.
Command: disable dnsr static
DES-3326S:4#
247