D-Link DES-3326S - Page 254

D-Link DES-3326S Layer 3 Switch CLI Reference
show dnsr
Used to display the current DNS relay status.
Syntax
show dnsr {static}
Description This command is used to display the current
DNS relay status.
Parameters
static − Allows the display of only the static
entries into the DNS relay table. If this parameter
is omitted, the entire DNS relay table will be
displayed.
Restrictions None.
Purpose
Example Usage:
To display DNS relay status:
DES-3326S:4#show dnsr static
Command: show dnsr static
DNS Relay Static Table
www.123.com.tw 10.12.12.123
Total Entries: 2
Domain Name IP Address
-------------------------------------- ---------------
bbs.ntu.edu.tw 140.112.1.23
DES-3326S:4#
248