D-Link DES-3326S - Page 264

D-Link DES-3326S Layer 3 Switch CLI Reference
show dvmrp routing_table
Purpose Used to display the current DVMRP routing table.
Syntax
show dvmrp routing table {ipaddress
<network_address>}
Description
<ipif_name> − The name of the IP interface for
which you want to display the corresponding
DVMRP routing table.
ipaddress <network_address> − The IP address
and netmask of the destination. You can specify
the IP address and netmask information using
the traditional format or the CIDR format. For
example, 10.1.2.3|255.255.0.0 or 10.2.3.4|16.
Restrictions None.
The command is used to display the current
DVMRP routing table.
Parameters
Example Usage:
Command: show dvmrp routing_table
Source Address Source Mask Next Hop Router Hop Learned Interface Expire
To display DVMRP routing table:
DES-3326S:4#show dvmrp routing_table
DVMRP Routing Table
--------------- --------------- --------------- ---- ------- ------------ ------
10.0.0.0 255.0.0.0 10.90.90.90 2 Local System -
20.0.0.0 255.0.0.0 20.1.1.1 2 Local ip2 -
30.0.0.0 255.0.0.0 30.1.1.1 2 Local ip3 -
Total Entries: 3
DES-3326S:4#
258