D-Link DES-3326S - Page 265

D-Link DES-3326S Layer 3 Switch CLI Reference
show dvmrp neighbor
Purpose Used to display the DVMRP neighbor table.
Syntax
show dvmrp neighbor {ipif
<ipif_name>|ipaddress <network_address>}
Description This command will display the current DVMRP
neighbor table.
Parameters
<ipif_name> − The name of the IP interface for
which you want to display the DVMRP neighbor
table.
ipaddress <network_address> − The IP address
and netmask of the destination. You can specify
the IP address and netmask information using
the traditional format or the CIDR format. For
example, 10.1.2.3|255.255.0.0 or 10.2.3.4|16.
Restrictions None.
Example Usage:
To display DVMRP neighbor table:
DES-3326S:4#show dvmrp neighbor
Command: show dvmrp neighbor
System 10.2.1.123 2 250
Interface Neighbor Address Generation ID Expire Time
--------------- ----------------------- ------------------- ------------
Total Entries: 1
259