D-Link DES-3326S - Page 266

D-Link DES-3326S Layer 3 Switch CLI Reference
show dvmrp nexthop
Purpose Used to display the current DVMRP routing next
hop table.
Syntax
show dvmrp nexthop {ipaddress
<network_address>|ipif <ipif_name>}
Description This command will display the DVMRP routing
next hop table.
Parameters
<ipif_name> − The name of the IP interface for
which you want to display the current DVMRP
routing next hop table.
ipaddress <network_address> − The IP address
and netmask of the destination. You can specify
the IP address and netmask information using
the traditional format or the CIDR format. For
example, 10.1.2.3|255.255.0.0 or 10.2.3.4|16.
Restrictions None.
Example Usage:
To display DVMRP routing next hop table:
DES-3326S:4#show dvmrp nexthop
Source IP Address Source Mask Interface Name Type
10.0.0.0 255.0.0.0 ip2 Leaf
20.0.0.0 255.0.0.0 System Leaf
30.0.0.0 255.0.0.0 ip2 Leaf
Command: show dvmrp nexthop
----------------- ---------------- --------------- ------
10.0.0.0 255.0.0.0 ip3 Leaf
20.0.0.0 255.0.0.0 ip3 Leaf
30.0.0.0 255.0.0.0 System Leaf
Total Entries: 6
DES-3326S:4#
260