D-Link DES-3326S - Page 267

D-Link DES-3326S Layer 3 Switch CLI Reference
show dvmrp
Purpose Used to display the current DVMRP routing table.
Syntax
show dvmrp {<ipif_name>}
Description The command will display the current DVMRP
routing table.
Parameters
<ipif_name> − The name of the IP interface for
which you want to display the DVMRP routing
table.
Restrictions None.
Example Usage:
To show DVMRP configurations:
DES-3326S:4#show dvmrp
Command: show dvmrp
DVMRP Global State : Disabled
Interface IP Address Neighbor Timeout Probe Metric State
------------ --------------- --------------- ----- ------ -------
System 10.90.90.90 35 10 1 Disabled
Total Entries: 1
DES-3326S:4#
261