D-Link DES-3326S - Page 283

D-Link DES-3326S Layer 3 Switch CLI Reference
Command Parameters
ink]
show ospf neighbor <ipaddr>
show ospf virtual_neighbor <area_id>
<neighbor_id>
config ospf ipif <ipif_name 12>
area <area_id>
priority <value>
hello_interval <1-65535 sec>
dead_interval <1-65535 sec>
authentication [none|simple <password>|
md5 <key_id 1-255>]
metric <value 1-65535>
state [enable|disable]
config ospf all area <area_id>
priority <value>
hello_interval <1-65535 sec>
dead_interval <1-65535 sec>
authentication [none|simple
<password>|md5 <key_id>]
metric <value>
state [enable|disable]
show ospf ipif <ipif_name 12>
show ospf all
config ospf virtual_link <area_id>
<neighbor_id>
hello_interval <1-65535 sec>
dead_interval <1-65535 sec>
authentication [simple <password>|md5
<key_id>|none]
delete ospf virtual_link <area_id>
<neighbor_id>
show ospf virtual_link <area_id>
<neighbor_id>
Each command is listed, in detail, in the following sections.
277