D-Link DES-3326S - Page 284

D-Link DES-3326S Layer 3 Switch CLI Reference
config ospf
Purpose Used to configure the OSPF router ID.
Syntax
config ospf {router_id <ipaddr>}
Description This command is used to configure the OSPF
router ID.
Parameters
<ipaddr> − The OSPF router ID.
Restrictions Only administrator-level users can issue this
command.
Usage Example
To configure the OSPF router ID:
DES-3326S:4#config ospf router_id 10.48.74.122
Command: config ospf router_id 10.48.74.122
Success.
DES-3326S:4#
enable ospf
Purpose Used to enable OSPF on the Switch.
Syntax
enable ospf
Description
This command, in combination with the disable
ospf command below, is used to enable and
disable OSPF on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this
command.
Usage Example
To enable OSPF on the Switch:
DES-3326S:4#enable ospf
Command: enable ospf
Success.
DES-3326S:4#
278