D-Link DES-3326S - Page 294

D-Link DES-3326S Layer 3 Switch CLI Reference
config ospf host_route
Purpose Used to configure OSPF host route settings.
Syntax
config ospf host_route <ipaddr> {area
<area_id>|metric <value>}
Description This command is used to configure an OSPF host
route settings.
Parameters
<ipaddr> − The IP address of the host.
<area_id> − <area_id> − A 32-bit number in the
form of an IP address (xxx.xxx.xxx.xxx) that
uniquely identifies the OSPF area in the OSPF
domain.
<value> − a metric between 1 and 65535 that will
be advertised for the route.
Only administrator-level users can issue this
command.
Restrictions
Usage Example
To configure an OSPF host route:
DES-3326S:4#config ospf host_route 10.48.74.122 area 10.1.1.1 metric 2
Command: config ospf host_route 10.48.74.122 area 10.1.1.1 metric 2
Success.
DES-3326S:4#
288