D-Link DES-3326S - Page 295

D-Link DES-3326S Layer 3 Switch CLI Reference
show ospf host_route
Purpose Used to display the current OSPF host route
table.
Syntax
show ospf host_route {<ipaddr>}
Description This command will display the current OSPF host
route table.
Parameters
<ipaddr> − The IP address of the host.
Restrictions None.
Usage Example:
To display the current OSPF host route table:
DES-3326S:4#show ospf host_route
Command: show ospf host_route
Host Address Metric Area_ID TOS
--------------- --------------- ----------- ------
10.48.73.21 2 10.1.1.1 0
10.48.74.122 1 10.1.1.1 0
Total Entries: 2
DES-3326S:4#
289