D-Link DES-3326S - Page 299

D-Link DES-3326S Layer 3 Switch CLI Reference
show ospf aggregation
Purpose Used to display the current OSPF area
aggregation settings.
show ospf aggregation {<area_id>}
This command will display the current OSPF
area aggregation settings.
Parameters
<area_id> − The OSPF area ID.
Restrictions None.
Syntax
Description
Usage Example
To display OSPF area aggregation settings:
DES-3326S:4#show ospf aggregation
Command: show ospf aggregation
OSPF Area Aggregation Settings
Area ID Aggregated LSDB Advertise
Network Address Type
------------ --------------------- -------------- -------------
10.1.1.1 10.0.0.0|8 Summary Enabled
10.1.1.1 20.2.0.0|16 Summary Enabled
Total Entries: 2
DES-3326S:4#
293