D-Link DES-3326S - Page 309

D-Link DES-3326S Layer 3 Switch CLI Reference
delete ospf virtual_link
Purpose Used to delete an OSPF virtual interface.
Syntax
delete ospf virtual_link <area_id>
<neighbor_id>
Description This command will delete an OSPF virtual
interface from the Switch.
Parameters
<area_id> − A 32-bit number in the form of
an IP address (xxx.xxx.xxx.xxx) that
uniquely identifies the OSPF area in the
OSPF domain.
<neighbor_id> − The OSPF router ID for
the remote area. This is a 32-bit number in
the form of an IP address (xxx.xxx.xxx.xxx)
that uniquely identifies the remote area’s
Area Border Router. The router ID of the
neighbor router.
Restrictions Only administrator-level users can issue
this command.
Usage Example:
To delete an OSPF virtual interface from the Switch:
DES-3326S:4#delete ospf virtual_link 10.1.12 20.1.1.1
Command: delete ospf virtual_link 10.1.12 20.1.1.1
Success.
DES-3326S:4#
303