D-Link DES-3326S - Page 66

D-Link DES-3326S Layer 3 Switch CLI Reference
delete snmp host
Purpose Used to remove a recipient of SNMP traps
generated by the Switch’s SNMP agent.
Syntax
delete snmp host <ipaddr>
Description
The delete snmp host command deletes a
recipient of SNMP traps generated by the
Switch’s SNMP agent.
Parameters
<ipaddr> − The IP address of a remote SNMP
manager that will receive SNMP traps
generated by the Switch’s SNMP agent.
Restrictions Only administrator-level users can issue this
command.
Example Usage:
To delete an SNMP host entry:
DES-3326S:4#delete snmp host 10.48.74.100
Command: delete snmp host 10.48.74.100
Success.
DES-3326S:4#
60