D-Link DES-3326S - Page 68

D-Link DES-3326S Layer 3 Switch CLI Reference
enable rmon
Purpose Used to enable RMON on the Switch.
Syntax
enable rmon
Description This command is used, in conjunction with the
disable rmon command below, to enable and
disable remote monitoring (RMON) on the
Switch.
Parameters none.
Restrictions Only administrator-level users can issue this
command.
Example Usage:
To enable RMON:
DES-3326S:4#enable rmon
Command: enable rmon
Success.
DES-3326S:4#
62