D-Link DES-3326S - Page 87

D-Link DES-3326S Layer 3 Switch CLI Reference
show log
Purpose Used to display the Switch history log.
Syntax
show log {index <value>}
Description This command will display the contents of the
Switch’s history log.
Parameters
index <value> − The show log command will
display the history log until the log number
reaches this value.
Restrictions None.
Example Usage:
To display the Switch history log:
DES-3326S:4#show log
Command: show log
Index Time Log Text
----- ------------------- ----------------------------------------------------
75 00000 days 01:17:05 Successful login through Telnet (Username: Anonymous)
74 00000 days 01:02:56 Successful login through Console (Username: Anonymou s)
73 00000 days 01:01:49 Successful login through Web (Username: Anonymous)
72 00000 days 01:01:22 Port 4 link up, 100Mbps FULL duplex
71 00000 days 00:45:55 Internal Power is recovered
70 00000 days 00:43:58 Internal Power failed
69 00000 days 00:19:37 Console session timed out (Username: Anonymous)
68 00000 days 00:07:43 Redundant Power is working
67 00000 days 00:05:37 Successful login through Console (Username: Anonymous)
66 00000 days 00:04:20 Logout through Console (Username: Anonymous)
65 00000 days 00:04:11 Successful login through Console (Username: Anonymous)
64 00000 days 00:00:01 System started up
63 00000 days 00:00:01 Spanning Tree Protocol is disabled
62 00000 days 00:06:19 Spanning Tree Protocol is disabled
61 00000 days 00:06:16 Configuration saved to flash (Username: Anonymous)
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
81