D-Link DES-3326S - Page 88

D-Link DES-3326S Layer 3 Switch CLI Reference
enable syslog
Purpose Used to enable the system log to be sent to a
remote host.
Syntax
enable syslog
Description
The enable syslog command enables the
system log to be sent to a remote host.
Parameters None.
Restrictions Only administrator-level users can issue this
command.
Example Usage:
To enable the syslog function on the Switch:
DES-3326S:4#enable syslog
Command: enable syslog
Success.
DES-3326S:4#
82