D-Link DES-3326S - Page 90

D-Link DES-3326S Layer 3 Switch CLI Reference
show syslog
Purpose Used to display the syslog protocol status as
enable or disabled.
Syntax show syslog
Description
The show syslog command displays the syslog
status as enabled or disabled.
Parameters None.
Restrictions None.
Example Usage:
To display the current status of the syslog function:
DES-3326S:4#show syslog
Command: show syslog
Syslog Global State: Enabled
DES-3326S:4#
84