Dual-Speed Stackable Hub Web-based Management User’s Guide
Web-based Network Management90
♦ Source Address
Shows the source Ethernet address of the frame as
received by the hub.
♦ Time
Shows the amount of time since the last packet was transmitted
on the port in terms of System Uptime (SysUpTime).
Intrusion
To display this screen, click
User
, then
Intrusion.
The Hub intrusion secu-
rity feature can be used to dedicate a port to a given piece of hardware. If a
different device (read Network Interface Card) transmits to the port, the hub
can be set to either partition the port, send a trap notification to the network
manager, or both. The device identification is by Ethernet (MAC) address.
To Next Page
Loading...
